Curtains are a beautiful and important part of interior design. They offer a mix of aesthetics, privacy, and light control. Many modern styles use simple rods, while others require tracks and gliders for proper curtain setup. Today, we’re talking about gliders, which are an essential part of curtain installation Dubai. Gliders are specific products inserted in tracks for modern and innovative window dressing. Their design makes them perfect for modern spaces and also flexible for different window shapes. Let’s see how traditional pinch-pleat and modern track systems work. We will see how these make installation easier and help achieve a professional look.
Ensure These Tools Before Starting Installation
- Measuring tape
- Pencil and paper
- Spirit level
- Drill and drill bits
- Screwdrivers
A Step-by-Step Guide to Installing Gliders
Here is a simple guide that explains how to install gliders for your Curtains Dubai. Let’s see it in detail before ground work.
Remove the Track End
Remove the end stop or pulley mechanism of a tracker using a small Phillips screwdriver for screws or pliers for tight caps. If it’s stuck, you might need to use tweezers to carefully lift it off. Finally, pull off the cap or wheel. Now, remove the old gliders by sliding them out, if any are already installed.
Positioning the Gliders
Place the new gliders in the trackers so that your curtains hang nicely and don’t tilt forward. Try to space the gliders evenly. A simple rule is to put them at a distance of 8-10 cm along the curtain rail.
Re-secure End Caps
Re-securing a curtain track end stop for gliders by sliding the end cap back into the track channel and locking it into place. This is achieved by tightening a screw, tapping the cap into place, or rotating a locking lever. The final mechanism depends on tracker type, and you know this in 1st step.
Hang the Curtains
Finally, put the tracker in the right spot and then hang the curtain on it. But get someone to help with this step because installing a heavy curtain without proper support can lead to accidents, like falling off a ladder.
Special Tips to Make Perfect Glider Installation
Let’s see a few tips that help you to make a perfect curtain installation Dubai from start to finish without any hassle.
Pre-Installation Preparation
- Clean the Track: Wipe the inside of the track with a damp cloth to remove all dust or debris before inserting gliders.
- Insert Gliders First: It is essential to insert gliders before installing the track on the wall. Trying to insert gliders after track installation makes the process difficult.
- Use Proper Lubrication: Spray a dry silicone or rub with furniture polish into the track to keep the smooth and silent movement of the glider.
Glider Placement and Spacing
- Ideal Spacing: Keep the space of 8 to 10 cm between 2 gliders throughout.
- Avoid Sagging: Use more gliders for a heavy curtain, and a bit long tracke to make a perfect lift.
- Orientation Matters: Turn the glider holes toward the room to ensure the proper free movement.
Mounting the Track
- Ensure Proper Leveling: Use a spirit level to keep the track completely straight.
- Proper Clearance: Maintain a 5–10 cm gap from the wall to allow for clearance in ceiling-mounted curtains.
- Secure the End Stops: Fix the end caps firmly to prevent the gliders from sliding out.
Troubleshooting and Maintenance
- If Gliders Snag: If the gliders get stuck, check the joints of your track. If two track pieces are connected, make sure they are perfectly aligned.
- Replace Damaged Gliders: If the curtain isn’t moving properly, change the sliders with silicone-filled sliders.
- Train the Curtains: Pull the curtains to the desired position and leave them for 24–48 hours so the fabric ‘sets’ and the curtains look just right.
Conclusion
Are you looking for the best curtain tracks and gliders for your home? Curtains Outlet offers a wide range of curtain tracks in many different widths and designs. If you need any help choosing the perfect track or curtain installation Dubai for your home or office, get in touch with our team today.
Frequently Asked Questions
How to Install Curtain Track Gliders on the Wall?
To install curtain track gliders on the wall, first fix the brackets into the wall at 40 cm intervals. Now place the track and insert the gliders. At the end, before setting the height correctly, make sure the hooks are facing into the room. Important tools include a drill, tape measure, spirit level, and wall anchors.
How to Install Curtain Track Gliders without Screws?
To install the curtain track gliders without screws, remove the tacker end and slide the gliders into the channel. For many modern tracks, you can also clip the new glider directly into the track channel from the bottom. However, if needed, you can remove the old glider with a side cutter. For the track itself, use adhesive hooks or a no-drill track.
How to Install Curtain Track Gliders on the Ceiling?
To install the gliders on the curtain track on the ceiling, first mark the spots for the brackets (every 50-60 cm). Then keep a distance of 5-10 cm from the wall and fix the anchors. Now put the gliders into the track channel and attach the track to the brackets. At the end, secure it with end caps so the gliders do not fall off.
How to Remove the Curtain Track from the Brackets?
Release the locking mechanism to take the curtain track off its bracket, which is usually a lever under the bracket. You can press it with a flat-head screwdriver or just your finger. If there’s no lever, look for small hidden screws, or try sliding the track out from the bracket holders.
How to Hang Curtains on Gliders and Hooks?
First, count the track gliders to make sure there are enough hooks for both panels. Put your hooks into the heading tape pockets, spacing them evenly about 8 to 10 cm apart so the curtain doesn’t sag. Support the weight of the fabric whenever you insert a hook into a glider. Finally, secure the last hook into the fixed end stop so the outer edge of the curtain stays firmly in place.
How Long Does the Installation Process Usually Take for A Beginner?
The installation process of a curtain for a beginner usually takes about 15 to 30 minutes per window. The process is straightforward, involving removing the end cap, sliding the gliders in, and replacing the end cap.
What are the Best Safety Practices for Ladder and Tool Use?
Only use the ladder on a stable and flat surface, and make sure it’s secured so it won’t move. Don’t place it on boxes, drums, or any unstable spots for extra height. Don’t move the ladder when someone or something is on it.
